20 November 2026
Even a strong bolted joint can lose its initial tightness over time. This is dangerous for equipment and steel structures. Therefore, it is important not only to select the right bolts and <u>hex nuts</u> from Dinmark’s product range, but also to understand why connections loosen and how to maintain their reliability.
The reliability of a fastener depends on the tightening torque, the condition of the surfaces, and the operating conditions. A loss of tightening force does not always mean that the nut has come loose: sometimes the cause is component settlement or dimensional changes.
In machine tools and transportation, connections are subject to vibrations. Transverse movement of parts can cause self-loosening if the tightening torque was insufficient. Under such conditions, load calculations and an appropriate locking method are essential.
Heating and cooling cause metal parts to change dimensions. If the joined materials have different coefficients of thermal expansion, the tightening force may fluctuate. Creep of gaskets and the compression of surface irregularities also play a role.
Insufficient tightening torque does not provide the required clamping force, while excessive torque can damage the threads or overload the bolt. Lubricant, coatings, and the condition of the threads also affect the clamping force at a given torque.
The fastening method is selected based on vibration, temperature, and the frequency of disassembly.
Self-locking nuts provide additional resistance to rotation thanks to a polymer insert or deformation of the metal part. Polymer inserts may not be suitable for high temperatures. Locking plates and other mechanical elements are used where the design calls for them. A standard flat washer alone does not guarantee protection against unscrewing.
Anaerobic compounds fill the gaps between metal threaded surfaces and, once cured, prevent their unintended rotation. The strength of the lock, temperature, and the possibility of disassembly must be taken into account. Before application, follow the manufacturer’s instructions for surface preparation.
The torque is determined based on the technical documentation for the specific joint, not just on the bolt diameter. Use a calibrated torque wrench for installation and follow the specified tightening sequence. If the project requires tension control, a single torque measurement may not be sufficient.
The frequency of inspections depends on the loads and the criticality of the assembly. During inspections, pay attention to component misalignment, signs of corrosion, thread damage, and signs of nut rotation. Torque or clamping force checks must be performed strictly according to the approved procedure: haphazard tightening can compromise the specified parameters.
Therefore, preventing loosening begins with proper design, correct installation, and regular inspection. Even high-quality hex nuts require appropriate operating conditions and compatible fasteners.
Олена Болган
Nov. 19, 2026
The Pension Fund Has Not Paid One Million to the Family of a Deceased Employee of the Port of Chornomorsk